|

|
|
Electronic System Problem Solving for High-Tech
and
New Product Research &
Development
|
|
|
|
|
| Products |
Home Services Resources Technologies Confidentiality Contact Us Affiliates Products FAQ's Links Terms Customer
Testimonials!
Tips: 1. Developing from scratch 2. Bringing
a product to Market 3.
Prototypes
Concept Exploration Sub-section Testing Schematic Capture Device Programming Board Layout Circuit Board Production Product Development
e-mail MoreInfoPlease
|
|
CSE maintains no products of its own. This would serve as a conflict of interest. Instead, we focus our full effort on the success of your products through expert engineering, design, and service at affordable prices.
Here is a sampling of some of the products we
have made possible for our clients in the recent past.
- Custom Asynchronous
Video Combiner System:
Currently
in use for score display at the National Bowling Stadium in
Reno, Nevada: This device digitizes
two independently asynchronous color video streams in real
time and simultaneously displays
a composite high resolution image whose pixel parameters are
programmable without image interruption.
This device uses an Intel processor. This device was designed
to fit a pre-existing enclosure
and connect to a proprietary bus. - Amtrack
Keyboard Alarm
Interface (Enunciator)
with playback
of digitized recordings of customer required effects:
This fully custom
desktop device intercepts
system command strings and alerts
the operator with specific prerecorded
sounds when certain conditions are detected. This product was
designed with PLD's, rather than
a processor. These device remain in operation at Amtrak. scroll down for more...
|
- 300W, 40MHz RF Plasma
Power Supply for
gas excitation in the laboratory and industrial production:
The purpose of this production unit remains confidential,
but involved the rapid design of custom power RF transformers
and conduits to meet the very
tight size specification. The unit allows for modulated and
digitally controlled output power.
- Legacy Fax to Internet
Bridge:
This device, marketed as an
internet
based fax interceptor/receiver and re-router
uses an Intel embedded processor and incorporates the design
of a custom miniaturized Public
Switched Telephone Network (PSTN) simulator with ringer circuit
and enhanced features along
with an integrated LCD controller and special analog circuitry.
This device accepts standard
memory modules for memory expansion.
- Triple Channel ISA-bus
VGA controller:
This
device was designed before the advent of the PCI bus to affordably
solve the
industrial need to independently control multiple VGA monitors
with a single computer installation.
- Electroluminescent
(EL) inverter designs:
Numerous
EL driver designs including those
targeted for ASIC integration and discrete based solutions.
These would include lamp age and
color compensation circuitry, the automotive and consumer industries
as well as custom magnetics
designs.
- Custom PDA for the
medical
field:
This design was a forerunner
to
the Apple Newton and included a touch-screen over
a graphic LCD and boasted long battery life and natural handwriting
recognition (This software
was produced by my client). This product used an Intel micro-controller.
The mechanical design
was also my responsibility.
- High Voltage Special
Effects Controller
for use with 30-foot neon signage bulbs:
This
product required the
design of a special high voltage, power, and high frequency
switching supply and custom magnetics.
- Ethernet network
diagnostic
PCMCIA card:
This product, being
released
now, meets very tight power and size requirements and
includes 10/100 Ethernet hardware and an innovative TDR subcircuit.
- Ultra-compact 436MHz
Data Modem and 1W
RF Transmitter for a research satellite:
This product required the
design of a low out-gassing, narrow-band, FM, RF transmitter,
fed by a digital Gaussian modulator
at a minimum payload burden for launch into space.
- Synthetic Voice Enunciator
System for
RF station call signaling:
This
device uses digital voice synthesis
and computer control to auto-signal the "call" ID
of an RF radio repeater.
- Custom Dual-Channel
"High-Resolution"
Color NTSC Video "Graphics Card" for the ISA bus:
This
device incorporated a CPLD and micro-controller timing solution
and S-Video and Composite Video
outputs for two independent video channels. The proprietary
digital interface prevented interference
with other video cards in the system. This product was designed
without proprietary ASIC devices.
- Pharmaceutical Blood
Analysis Robot Controller
board:
This
device made use of the Intel Controller Area Network
(CAN) bus devices and Intel processors for the control of numerous
robotic systems.
- Line Powered Auto-dialer:
This device, powered entirely by the voltage
levels available from the POTS line (plain old telephone signal), responds to user
input and
sensing and automatically dials as needed. - Dual Tank Water Softener Controller:
This special water softener controller allows
a new tank system to operate continuously without time out
for regeneration.
- Forced Air Portable
Anthrax Filter:
This device was developed
in conjunction to our client's patented filter system as a portable safeguard against anthrax
poisoning.
- In-line Ammeter:
This device would unobtrusively measure AC load current.
- Multi-Carrier RF
AM/FM Modulator:
This device is a patented exciter capable
of producing a multiplicity of simultaneously modulated carriers
using both AM and FM modulation.
|
|
|
Call to discuss your specific electronic concept.
|
|
|
|
|
(c) 2005 by
CSE. All rights
reserved. |
|
|